​How to find the serial number of my device?
Step.1. You can find it on the white label on the device.
Explore more
​How to modify the IP address of Uniarch product?
The default IP address of NVR is 192.168.1.30, DHCP is enabled by default.
Explore more
​How to change the login password of admin user?
Step1. Log into the NVR on the monitor
Explore more
​How to disable login password on Uniarch NVR?
Log into your NVR on the Monitor, go to【System】>【Basic】>【Basic Setup】
Explore more
​How to disable unlock pattern on NVR monitor?
Log into the NVR on the monitor, go to 【System】>【User】
Explore more
​What to do when I forget the NVR unlock pattern?
You can click on ‘Enter password’ on the unlock pattern page and use the login password to log in.
Explore more
​How to find the IP of my computer?
IP address of PC can be found as below,Control Panel>Network and Internet>Network and Sharing Center
Explore more
​How to find the current device system date?
If there is a monitor connected to NVR, the NVR system date can be found on the monitor
Explore more
​What to do when I forget device password
If you forget the login password of your device, please try below instructions
Explore more
​How to install plugin (Internet Explorer only)
Step 1. Internet Explorer (9.0 or later version) is recommended for logging into Uniarch products.
Explore more
​How to access into the web interface of a device?
Step 1. Connect your device to the same local network with your PC
Explore more
​How to log into an Uniarch NVR?
Step 1. Connect a monitor to the NVR through a VGA or HDMI cable
Explore more
FirstPreviousNextLast1/3